Eibach wheel spacer 2x35mm for Land Rover Defender DISCOVERY V RANGE ROVER IV Ra
Eibach Pro Spacer - Wheel Spacers. Width of spacers: 2x35mm PCD: 5x120 Centerbore: 72,5mm Eibach wheel spacer system 4 Eibach Pro-Spacer wheel spacers System 4 give the look and performance of your vehicle the finishing touch.
Your vehicle gets a wider, more stable track - quickly and easily. Eibach Pro-Spacer is the ideal combination for use with lowering springs, if the original or aftermarket wheels are missing that last optical "kick". With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch.
That's how the car's look gets its final touch. By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behavior combined with higher stability, as the roll of the chassis is influenced in a positive manner. Made of high-tensile-strength aluminum alloy.
Perfect fit due to the smallest manufacturing tolerances, resulting in balanced wheel balance. All applications tested in rigid durability- and fatigue tests. High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021).Significant weight advantage compared to wheel-spacers made from steel. Disc with a screw system. With centering collar (centering nose). Track change from 30 to 60 mm (disc thickness from 20 to 30 mm).
A disc at wheel carrier: by using special-fixing nut b wheel at disc: by using production (or accessory) -nut. With pressed-in knurled studs inkl. Short special wheel nuts, TÜV-certificate as download Eibach product code: S90-4-35-013-B Notes: S9 - ATTENTION - ALSO NOTE ON SERIES WHEELS! - When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is not possible to use the wheels or wheelspacers!
Please check as follows: Stud lengh e. 15mm = 10mm exess length. So the cut out should have 11mm depth to take the original stud. Further the cut out should have minimum 22mmx22mm height/width to take the overlaping nut.
It´s allowed to shorten the stud bolt with a saw Maximal up to the beginning of the nut. We recommend only to shorten the minimum lengh. If shorten the stud bolts, first please consider that all wheels used at the car still will fit e. Summer- / winterwheels ATTENTION: when using 15 mm wheelspacers at least 7 mm deep cut-outs are needed (at 20mm wheelspacers at least 2mm deep cut-outs are needed) as the nuts stand over the contact surface!
It´s allowed to shorten the stud bolts Fits for. 2.0 D200 SD4 4x4. 2.0 D240 SD4 4x4. 2.0 P300 Si4 4x4.2.0 P400e Hybrid 4x4. 3.0 D200 MHEV 4x4.
3.0 D250 MHEV 4x4. 3.0 D300 MHEV 4x4. 3.0 P400 I6 MHEV 4x4. 3.0 P400 MHEV 4x4. 3.0 SDV6 Hybrid 4x4. RANGE ROVER SPORT II (L494).2.0 P400e PHEV 4x4. 3.0 D350 MHEV 4x4. 3.0 P360 MHEV 4x4. Made from high-tensile-strength aluminum alloy. Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance.
Eibach Pro-Spacer is the ideal combination for use with the Eibach Pro-Kit as well the Sportline, if the original or aftermarket wheels are missing that last optical "kick". Optimize the "sportive touch" to the last detail: wheels, tires, Eibach Suspension Components and Pro-Spacer! The Pro-Spacer is available in different versions from 5 to 30?